The attention points in the process of galvanized wire products in galvanized

Galvanized wire in the process of galvanized unavoidably have some problems, when is wire factory should be how to solve these problems, the most important thing is how to prevent the emergence of a series of problems.

The duration of the galvanized layer of protection and coating thickness of the relationship is very large. In general, and in the Lord of the dry gas in indoor use, the thickness of the galvanized layer only 6-12 mu m ", and under the condition of the environment is bad, the galvanized layer thickness need 20 microns to "up to 50 microns. Therefore, when choosing the galvanized layer thickness to consider the influence of the environment.

After passivation of zinc coating, can generate a layer of bright and beautiful color old passivation membrane, can significantly improve the protective performance buckle oar ACTS the role of performance.

Zinc plating solution is a lot of more phyletic, according to its nature can be divided into two types: cyanide plating solution and non cyanide plating solution. Cyanide zinc plating solution has good dispersive capacity and coverage, coating crystallization smooth and delicate, simple operation, the applicability is wide and has long been used in production. But because of the plating solution containing highly toxic cyanide in electroplating escape of gas in the process of health hazards to the worker. The wastewater before discharge must be strictly processing.